Spa & Pool Impellers & Wet ends

Aqua-Flo Circmaster (High-Flow) 1/15hp Impeller.Has a White, Green, White, Green dot on the impeller shaft.Impeller diameter : 111mmInternal Vane Width: 12mmSeal required, 5/8 Type6, Part # S5/8T6

Aqua-Flo Circmaster 1.0hp Impeller.Has one Yellow dot on the impeller shaft.Impeller diameter: 95mm.Internal vane width 11mmSeal required 5/8 Type 6. Part# S5/8T6

Aqua-Flo XP2 48 Frame Volute(Pump Body)92mm between mounting bolts, also you may see a “B” moulded next to the mounting bolt on the back of the body

Aquaflo XP2 Impeller 1.5hp Has two Blue dots on the impeller shaft. Used on Signature spas and others. Impeller diameter 111mm. Internal vane width 6.5mm. Seal required 5/8" Type 6. Part # S5/8T6

Aquaflo XP2 Impeller Has two Green dots on the impeller shaft. Used on Signature spas and others. Impeller diameter 112mm. Internal vane width 10.7mm Seal required 5/8" Type 6. Part # S5/8T6

Aquaflo XP2 Impeller 2.5hp Has White/Green/White Dot on the impeller shaft. Used on Signature spas and others. Impeller diameter 114mm. Internal vane width 12mm Seal required 5/8" Type 6. Part # S5/8T6

Aqua-Flo Xp2 Pump Body, Volute 90 Frame 102mm between motor mounting bolts

Aqua-Flow XP2 Pump Front/CoverHas a 50mm threaded inlet (Same thread as the LX and waterway models).Pump front does not fit the LX, Waterway and QB pump body.

Aqua-Flo Xp2 Volute 56 Fr / 90 Frame 6.3″104mm between motor mounting bolts

Aqua-Flo XP2 Wear Ring Sits over front of impeller 54mm ID, 64mm OD, 11mm high

Aqua-Flo XP2e Impeller 3.0hp USA (2.0hp AUS) Has three Silver dots and one orange on the impeller shaft. Impeller diameter: 112mm Internal vane width: 13mm Seal required 5/8 Type6. Part # S5/8T6

Aquaflo Circ-Master Impeller 1/15hp Has one Red dot on the impeller shaft. Used on Signature spas and others. Impeller diameter 95mm. Internal vane width 6mm. Seal required 5/8" Type 6. Part # S5/8T6 Impeller and Seal

Balboa Ultimax 2hp Impeller Impeller to suit Balboa Ultimax Pumps(Both the Blue and Black wetend) Impeller has a diameter of 115mm with an internal vane width of 13mm *Do not confuse this impeller with the one to suit the Balboa Superwow pump Mechanical seal...

Balboa/Onga 238 Spa Bath Pump Impeller.

Balboa/Onga 239 Impeller

Davey 1.5hp Booster Pump Impeller.This impeller can also be used on LX model pumps Impeller diameter: 115mmInternal vane width: 11mm

Davey QB Series Circ Pump Impeller(0.25hp). This impeller can also be used on later model Spanet Booster pumps (part number stamped on impeller) and LX pumps. Impeller diameter: 85mm. Internal vane width: 6mm. Seal required SB16. Part # D-SB16SP.

HotSpring Spas Limelight Jet Pump Drain Nipple 1/2" Limelight & Obs Tr

DRAIN FITTING, JET PUMP 1/4IN This part is a replacement black barbed fitting with o-ring for select hot tubs and Endless Pool models. Drain the water in your pool and spa with a vinyl tube. Easily threads into the suction cover. Compatible with 1989...

Davey QB 2.0hp Booster Pump Impeller. Old impellers were black in colour. Suits single and two speed models This impeller can also be used on later model Spanet XS pumps and LX pumps(part number stamped on impeller on both models). Impeller diameter: 107mm. Internal...

Davey QB 2.5hp Booster Pump Impeller. Old impellers were black in colour. Suits single and two speed models This impeller can also be used on later model Spanet XS pumps and LX pumps(part number stamped on impeller on both models). LX Pro Series LP/WP...

Davey QB 3.0hp Booster Pump Impeller. Old impellers were black in colour. Suits single and two speed models This impeller can also be used on later model Spanet XS pumps and LX pumps(part number stamped on impeller on both models). LX Pro Series LP/WP...

Aqua-Flo XP2e2.0hp USA (1.5hp AUS) Impeller.Has One Silver and one Blue dot on the impeller shaft.Impeller diameter: 103mmInternal vane width: 10mmSeal required 5/8 Type6. Part # S5/8T6

Aquaflo XP2e Impeller 3.0hp Has one Silver Dot on the impeller shaft. Used on Signature spas and others. Impeller diameter 115mm. Internal vane width 14mm. Seal required 5/8" Type 6. Part # S5/8T6 Impeller and Seal

Spa-Quip Maxiflow Impeller 1.5hp. Impeller will only fit motors with a 14mm diameter rotor shaft, not the old style with a 16.5mm shaft.**The impellers to suit 16.5mm shafts are no longer avaliable**Impeller diameter is 105mmInternal vane width is 12.7mmSeal required is 3/4 Type 6....

Davey Spa-Quip Maxiflow and Magnum Pump Body O'ring

Maxiflow pump body. Compatible with 50mm unions.

Aqua-Flo XP2/e Body o’ring

Spa Systems Piranha Cic Pump wet end assembly, used on Heritage Spas and other. Assembly is made up of the following two parts 1 x Faceplate / Suction Cover 1 x Pump body / Volute

Piranha Pump 2.0Hp Complete Wet End Sold only as a complete kit and comes withVoluteFace plateUnionsImpellerMechanical SealO’rings & Screws

Spa Systems Piranha Jet Pump 1.5hp & 2.0hp Impeller, Used on Heritage Spas and other brands OD: 116mm Vane With: 10mm 6 x Vanes Matching seal is required: 5/8 T7

Spa Systems Piranha Jet Pump Wet End Assembly Used on Heritage spas and others Comes with 1 X Face Plate and 1 X Pump Body Note: This is the complete wetend only. It does not include the motor. Sold Individually

Suits Supastream 100 1Hp Pool Pumps.?ÿ Mechanical Seal and oring should be replaced at the same time.?ÿ ?ÿ

Waterway 1.5hp Impeller. Marked 3hp in the front centre of the impeller. Original Impeller dimensionas: Diameter - 115mm, Internal vane width - 9mm. New Impeller Dimensions: Diameter -107mm, Internal vane width - 12mm Product of USA. Seal required 5/8" Type 7. Part # S5/8T7....

Waterway 1.75/20hp Impeller Original Impeller dimensionas: Diameter - 115mm, Internal vane width - 13mm and also had 4HP marked in the front centre of the impeller. New Impeller Dimensions: Diameter -107mm, Internal vane width - 15mm and is black in colour with a blue...

Waterway 2.0/2.5hp Impeller Original Impeller dimensionas: Diameter - 115mm, Internal vane width - 15.5mm New Impeller has the same dimensions but is black in colour. Seal required 5/8" Type 7. Part # S5/8T7. *NOTE - Either impeller may be suppliued depending on stock

Waterway Euro 30hp Impeller Original Impeller dimensionas: Diameter - 123mm, Internal vane width - 11mm and also has a red sot marked in the front centre of the impeller. New Impeller has the same dimensions but is black in colour. Seal required 5/8" Type...