Cloudy water in your spa pool can be frustrating, but it’s a common issue that’s usually easy to fix. At The Spa Shop, we’re here to help you restore your spa water to its crystal-clear best. Here’s a quick guide to troubleshooting and resolving cloudy spa water:

1. Test and Balance Your Water

Cloudy water is often caused by imbalanced water chemistry. Use a reliable test kit or test strips to check your spa’s pH, alkalinity, and sanitizer levels.

• Ideal Levels:
• pH: 7.2–7.6
• Alkalinity: 80–120 ppm
• Sanitizer (chlorine/bromine): 3–5 ppm
  Adjust these levels as needed using pH increasers, decreasers, or alkalinity boosters.

2. Shock Your Spa

If your sanitizer levels are low, bacteria and organic contaminants can build up, causing cloudiness. Shock your spa with BioGuard® Sanitizer, a powerful solution to oxidize impurities and restore clarity. Follow the product instructions for the correct dosage to ensure your water stays clean and balanced.

3. Clean or Replace Your Filter

A dirty or clogged filter can’t effectively remove debris and particles from the water. Use BioGuard® Filter Renew to deep-clean your filter and restore its efficiency. If your filter is old or heavily soiled, consider replacing it. Regular filter maintenance is key to preventing cloudy water.

4. Use a Clarifier

Spa clarifiers are designed to bind tiny particles together, making it easier for your filter to remove them. Add BioGuard® Purity to your spa water as directed, and run the filtration system for a few hours to clear up the cloudiness. This product is excellent for maintaining water clarity and preventing future issues.

5. Drain and Refill Your Spa

If the water remains cloudy despite your efforts, it may be time for a fresh start. Over time, dissolved solids and contaminants can build up, making it difficult to maintain clear water. Drain your spa, clean the shell, and refill it with fresh water. Don’t forget to rebalance the chemicals afterward.

6. Prevent Future Cloudiness

• Regular Maintenance: Test and balance your water weekly.
• Shock Regularly: Shock your spa every week, especially after heavy use.
• Clean Filters: Rinse your filter every 2–4 weeks and use BioGuard® Filter Renew for a deep clean.
• Shower Before Use: Rinse off oils, lotions, and dirt before entering the spa.

By following these steps, you can quickly fix cloudy spa water and keep it sparkling clean. If you need any products or advice, visit The Spa Shop—we’re here to help you enjoy your spa to the fullest!

Bonus Tip: Bring a water sample to The Spa Shop, and we’ll provide a free water test to help you pinpoint any issues and recommend the best solutions.